FABIO FANTOZZI

CURRICULUM VITAE

Trentennale Orthofan
Trentennale Orthofan
Trentennale Orthofan

C.R.O.N.-O.M.

In 1991 he became an ordinary member C.R.O.N.-O.M. (Centro Ricerca Ortodontica Nazionale-Ortopedisti Mascellari) and then became a member of the National Board of Directors in 1994. Also in the same year, after establishing the ORTHOFAN® Orthodontic Lab, of which he is the owner, he became a member of the GTO (National Association of Orthodontic Technicians) and later Territorial Manager for the Marche, Abruzzo and Molise regions.

PINZA D'ORO

At the end of the same year, he participated in the International "Pinza d'Oro" competition organized by the Ortec Club, taking 5th place in the "Vite d'Oro" award, with a display of a functional bi-maxillary apparatus of the Dutch school: the Ducovator.

BOOKS

He is the author of two books, "Tecnica Ortodontica: conoscere e progettare gli apparecchi ortodontici" published by Edi Ermes in 2013 and "Paradenti per gli sports: cosa è indispensabile sapere" published by Edizioni Martina in 2015. He co-authored a chapter in the book "Odonto Pediatria: a transdisciplinariedade na saude integral da crianca" published by Manole in 2015 in Brazil with Dr. Regina Lucia Da Silva Queiroz and Lucas Queiroz Caponi, already in its second reprint.

ARTICLES

He is the author of more than 50 technical articles published in various industry journals and on the Internet including some on mouth guards for sports.

GTO

In May 1996 he was elected National Vice President of the GTO and coordinator of the Regional Officers for the '96 triennium. ’97, ‘98.

SISTEMATICA T.O.M

Creator of the T.O.M. (Transbrackets Orthofan Method), I.P.A. (Indirect Positioning Arches) and E.C.S. (Etched Control System) systematics.

C.R.O.N.-O.M.

Speaker at numerous C.R.O.N.-O.M. International Congresses. in Sao Paulo, Brazil in 1996 and 2000, in Guayaquil, Ecuador in 1997 and 2001, in Buenos Aires, Argentina in 1998, in Rome in 1999 and 2007, in Marrakech and Casablanca, Morocco in 2002, 2008 and 2013, in Isla de Margarita, Venezuela in 2005, in Bucharest, Romania in 2006 and in Dijon, France in 2012.

CONFERENCES ABROAD

Speaker at further congresses abroad: Martinique, Antilles, in 2003; in France, at the EEDP (European Exposition Dentaire Paris) in Paris, in 2004; at the OTA (Orthodontic Technician Society), in Edinburgh, Scotland in 2007; at the GK, in Harz, Germany, in 2010; at the ESLO European Lingual Orthodontics Congress in Athens, Greece, where he was also the first Dental Technician from the society to be a member of the exclusively clinical jury for the evaluation of the posters; and at the 4th Stomatological Congress Bosnia and Herzegovina with international participation in Teslic, Bosnia and Herzegovina, in 2016.

TRANSBRACKETS ORTHOFAN METHOD

In May 1997, a paper on 'Transbrackets Orthofan Method' was presented at the XI Interregional Congress of Dentistry Disciplines by Prof. Sampalmieri, Dr. Morgioni and Dr. Lamarca.

GTO 1999-2001

He was elected GTO National President for the three-year period 1999-2001, but declined the post.

ORTHOFAN ORTHODONTIC STAGES

In 1998, he founded 'the Orthofan Orthodontic Stages', of which he is Scientific Director, where theoretical-practical courses for Dental Technicians and clinical courses are held, held by internationally renowned Orthodontic Medical Speakers.

ORTEC CLUB

In August 2001, he became an extraordinary member of the ORTEC Club (Associazione Tecnici Ortodontisti Italiani).

MICERIUM S.P.A.

Micerium S.p.A. is authorised by Micerium S.p.A. to conduct courses on the customised 'Harmony' lingual orthodontic system and on the design and manufacture of the Distal Jet, following which the company can issue regular certification to participants to purchase preformed kits.

RELATOR

Technical orthodontist relator at the School of Specialisation in Orthodontics at the 2nd Level Master's Degree Course in Orthodontic-Gnathological Therapy at the University of L'Aquila since 2003.

BEST REPORT

Winner for the best paper at the 13th Ortec National Conference in Caserta in March 2006.

UNIVERSITY OF ZURICH

In September 2007, he attended the orthodontic clinic at the University of Zurich, where he participated in an advanced training course for dental technicians on Teuscher braces held by Dr. U. Teuscher and the dental technician G. Pedroli.

UNIVERSITY OFTRIESTE

Since 2009 he has been an Adjunct Professor at the University of Trieste in Laboratory Methodology II.

ISO

Since 2010, he has been a technical orthodontist at the ISO (Istituto Studi Odontoiatrici), Leone S.p.A. in Florence.

AIOT

In 2011 he became a member of AIOT (Accademia Italiana Ortodonzia Tecnica) and in 2015 he became National Cultural Director.

PROTOTISPACE

2012 was the year of 3D printing and, after designing the logo, he founded the company PrototiSpace sas, which produces prototype models for aligners.

ODONTOAPNEIA

In 2013, he was appointed by Brazilian creator J.R.Ramos as the only official certifier for laboratories throughout Europe to manufacture the OdontoApneia device.

SIOS CONFERENCE

A SIOS member since 2013, he gave a video lecture at the 8th National Congress, presenting the production of a custom-made individual mouthguard with state-of-the-art materials.

ITALIATECH

In 2014, he founded Italiatech.net, a business network with 40 laboratories for the supply of customised medical devices abroad.

AIOT

In 2015 he was elected President of the Italian Academy of Technical Orthodontics AIOT for the year 2017 (he resigned due to incompatibility of two points on the statute) and in 2016 he founded the AIOI Italia, an academy present in 39 countries worldwide, of which he was the Vice President for Italy until 2022.

ORTHOFANPRO - ORTHOFAN EFFECT

Also in 2016, the Orthofan orthodontic laboratory evolved with two new brands: OrthofanPro for professional mouthguards and Orthofan Effect for invisible braces, and published landing pages for both divisions.

2017

In 2017, he was the first member of the jury at the Italian Orthodontic's got talent.

DEI ITALIA

In the same year, Dei Italia awarded him the title of Lecturer Exclusivist for instruction in the use of carbon fibre in sports mouthguards.

UNIVERSITÀ MANDIC

He then became an adjunct professor and technical manager in the Specialisation Course in Sports Dentistry at the Mandic University of São Paulo in Brazil.

AIOI

Also in 2017, he received in Sao Paulo, Brazil, from the AIOI, the medal and the International Diploma of Technician in Sports Dentistry.

DIGITAL SERVICE LEONE

In 2019, he became Technical Director of Digital Service Leone, a start-up of Leone SpA that deals with the production of custom-made medical devices made with the latest digital and 3D printing technologies.

C.T.U.

Entered in the Register of Technical Consultants (C.T.U.) of the Court of Teramo in the category Dental Technicians.

ORTODONZIA.COM

Scientific responsible for the website www.ortodonzia.com.

SCIENTIFIC COMMISSION

Member of the scientific committee of the magazine 'Il nuovo laboratorio odontotecnico' and the Brazilian magazine 'Revista Ortotecnica'.

UNIVERSITÀ TOR VERGATA

Lecturer at the university training course for dental technicians in "Laboratory Orthodontic Technique" in 2016, 2017 and 2018 at the University of Tor Vergata in Rome, directed by Prof. Paola Cozza

CAMERA COMMERCIO TERAMO

Enrolled in the Register of Surveyors and Experts category XI, sub no. 28 of the Camera di Commercio di Teramo.

ORTHODONTIC TECHNIQUE LESSONS

He has lectured on orthodontic technique at the Universities of Messina, Siena, Trieste, Perugia, L'Aquila, Chieti and Tor Vergata in Rome and has held theoretical and practical courses in Russia, Greece and Vietnam.

I.P.S.I.A. S.BENEDETTO D.T.

Dental technician orthodontist chosen for the 3rd area stages of the I.P.S.I.A. in S. Benedetto del Tr.

THEORETICAL AND PRACTICAL COURSES

He has held theoretical-practical courses in numerous Italian cities and at dental technician schools in Pescara, S. Benedetto del Tr. (AP), Matelica (MC), Carate Brianza (MI), Palermo, Ispica (RG), Milan and Teramo.

C.R.O.N.-O.M.

In 1991 he became an ordinary member C.R.O.N.-O.M. (Centro Ricerca Ortodontica Nazionale-Ortopedisti Mascellari) and then became a member of the National Board of Directors in 1994. Also in the same year, after establishing the ORTHOFAN® Orthodontic Lab, of which he is the owner, he became a member of the GTO (National Association of Orthodontic Technicians) and later Territorial Manager for the Marche, Abruzzo and Molise regions.

PINZA D'ORO

At the end of the same year, he participated in the International "Pinza d'Oro" competition organized by the Ortec Club, taking 5th place in the "Vite d'Oro" award, with a display of a functional bi-maxillary apparatus of the Dutch school: the Ducovator.

BOOKS

He is the author of two books, "Tecnica Ortodontica: conoscere e progettare gli apparecchi ortodontici" published by Edi Ermes in 2013 and "Paradenti per gli sports: cosa è indispensabile sapere" published by Edizioni Martina in 2015. He co-authored a chapter in the book "Odonto Pediatria: a transdisciplinariedade na saude integral da crianca" published by Manole in 2015 in Brazil with Dr. Regina Lucia Da Silva Queiroz and Lucas Queiroz Caponi, already in its second reprint.

ARTICLES

He is the author of more than 50 technical articles published in various industry journals and on the Internet including some on mouth guards for sports.

GTO

In May 1996 he was elected National Vice President of the GTO and coordinator of the Regional Officers for the '96 triennium. ’97, ‘98.

SISTEMATICA T.O.M

Creator of the T.O.M. (Transbrackets Orthofan Method), I.P.A. (Indirect Positioning Arches) and E.C.S. (Etched Control System) systematics.

C.R.O.N.-O.M.

Speaker at numerous C.R.O.N.-O.M. International Congresses. in Sao Paulo, Brazil in 1996 and 2000, in Guayaquil, Ecuador in 1997 and 2001, in Buenos Aires, Argentina in 1998, in Rome in 1999 and 2007, in Marrakech and Casablanca, Morocco in 2002, 2008 and 2013, in Isla de Margarita, Venezuela in 2005, in Bucharest, Romania in 2006 and in Dijon, France in 2012.

CONFERENCES ABROAD

Speaker at further congresses abroad: Martinique, Antilles, in 2003; in France, at the EEDP (European Exposition Dentaire Paris) in Paris, in 2004; at the OTA (Orthodontic Technician Society), in Edinburgh, Scotland in 2007; at the GK, in Harz, Germany, in 2010; at the ESLO European Lingual Orthodontics Congress in Athens, Greece, where he was also the first Dental Technician from the society to be a member of the exclusively clinical jury for the evaluation of the posters; and at the 4th Stomatological Congress Bosnia and Herzegovina with international participation in Teslic, Bosnia and Herzegovina, in 2016.

TRANSBRACKETS ORTHOFAN METHOD

In May 1997, a paper on 'Transbrackets Orthofan Method' was presented at the XI Interregional Congress of Dentistry Disciplines by Prof. Sampalmieri, Dr. Morgioni and Dr. Lamarca.

GTO 1999-2001

He was elected GTO National President for the three-year period 1999-2001, but declined the post.

ORTHOFAN ORTHODONTIC STAGES

In 1998, he founded 'the Orthofan Orthodontic Stages', of which he is Scientific Director, where theoretical-practical courses for Dental Technicians and clinical courses are held, held by internationally renowned Orthodontic Medical Speakers.

ORTEC CLUB

In August 2001, he became an extraordinary member of the ORTEC Club (Associazione Tecnici Ortodontisti Italiani).

MICERIUM S.P.A.

Micerium S.p.A. is authorised by Micerium S.p.A. to conduct courses on the customised 'Harmony' lingual orthodontic system and on the design and manufacture of the Distal Jet, following which the company can issue regular certification to participants to purchase preformed kits.

RELATOR

Technical orthodontist relator at the School of Specialisation in Orthodontics at the 2nd Level Master's Degree Course in Orthodontic-Gnathological Therapy at the University of L'Aquila since 2003.

BEST REPORT

Winner for the best paper at the 13th Ortec National Conference in Caserta in March 2006.

UNIVERSITY OF ZURICH

In September 2007, he attended the orthodontic clinic at the University of Zurich, where he participated in an advanced training course for dental technicians on Teuscher braces held by Dr. U. Teuscher and the dental technician G. Pedroli.

UNIVERSITY OFTRIESTE

Since 2009 he has been an Adjunct Professor at the University of Trieste in Laboratory Methodology II.

ISO

Since 2010, he has been a technical orthodontist at the ISO (Istituto Studi Odontoiatrici), Leone S.p.A. in Florence.

AIOT

In 2011 he became a member of AIOT (Accademia Italiana Ortodonzia Tecnica) and in 2015 he became National Cultural Director.

PROTOTISPACE

2012 was the year of 3D printing and, after designing the logo, he founded the company PrototiSpace sas, which produces prototype models for aligners.

ODONTOAPNEIA

In 2013, he was appointed by Brazilian creator J.R.Ramos as the only official certifier for laboratories throughout Europe to manufacture the OdontoApneia device.

SIOS CONFERENCE

A SIOS member since 2013, he gave a video lecture at the 8th National Congress, presenting the production of a custom-made individual mouthguard with state-of-the-art materials.

ITALIATECH

In 2014, he founded Italiatech.net, a business network with 40 laboratories for the supply of customised medical devices abroad.

AIOT

In 2015 he was elected President of the Italian Academy of Technical Orthodontics AIOT for the year 2017 (he resigned due to incompatibility of two points on the statute) and in 2016 he founded the AIOI Italia, an academy present in 39 countries worldwide, of which he was the Vice President for Italy until 2022.

ORTHOFANPRO - ORTHOFAN EFFECT

Also in 2016, the Orthofan orthodontic laboratory evolved with two new brands: OrthofanPro for professional mouthguards and Orthofan Effect for invisible braces, and published landing pages for both divisions.

2017

In 2017, he was the first member of the jury at the Italian Orthodontic's got talent.

DEI ITALIA

In the same year, Dei Italia awarded him the title of Lecturer Exclusivist for instruction in the use of carbon fibre in sports mouthguards.

UNIVERSITÀ MANDIC

He then became an adjunct professor and technical manager in the Specialisation Course in Sports Dentistry at the Mandic University of São Paulo in Brazil.

AIOI

Also in 2017, he received in Sao Paulo, Brazil, from the AIOI, the medal and the International Diploma of Technician in Sports Dentistry.

DIGITAL SERVICE LEONE

In 2019, he became Technical Director of Digital Service Leone, a start-up of Leone SpA that deals with the production of custom-made medical devices made with the latest digital and 3D printing technologies.

C.T.U.

Entered in the Register of Technical Consultants (C.T.U.) of the Court of Teramo in the category Dental Technicians.

ORTODONZIA.COM

Scientific responsible for the website www.ortodonzia.com.

SCIENTIFIC COMMISSION

Member of the scientific committee of the magazine 'Il nuovo laboratorio odontotecnico' and the Brazilian magazine 'Revista Ortotecnica'.

UNIVERSITÀ TOR VERGATA

Lecturer at the university training course for dental technicians in "Laboratory Orthodontic Technique" in 2016, 2017 and 2018 at the University of Tor Vergata in Rome, directed by Prof. Paola Cozza

CAMERA COMMERCIO TERAMO

Enrolled in the Register of Surveyors and Experts category XI, sub no. 28 of the Camera di Commercio di Teramo.

ORTHODONTIC TECHNIQUE LESSONS

He has lectured on orthodontic technique at the Universities of Messina, Siena, Trieste, Perugia, L'Aquila, Chieti and Tor Vergata in Rome and has held theoretical and practical courses in Russia, Greece and Vietnam.

I.P.S.I.A. S.BENEDETTO D.T.

Dental technician orthodontist chosen for the 3rd area stages of the I.P.S.I.A. in S. Benedetto del Tr.

THEORETICAL AND PRACTICAL COURSES

He has held theoretical-practical courses in numerous Italian cities and at dental technician schools in Pescara, S. Benedetto del Tr. (AP), Matelica (MC), Carate Brianza (MI), Palermo, Ispica (RG), Milan and Teramo.